Warranty
COMMITED TO QUALITY
Learn more about our policies...

Hoist Neptune Electric Series

Description

Neptune Electric Series
The Neptune Electric Series handles boats with care, style and class. This sleek, electric marina lift truck is perfect for a marina or boat storage facility of any size.
The spacious cab, air ride seat and tilt steering provide maximum comfort for the operator. Intuitive electronic joystick controls and superior visibility allow for safe and effortless handling, as well as fast cycle times. The advanced rubber fork covering system securely grips boats without damage. Galvanization and three-step paint process provide maximum corrosion protection.
While focusing on robustness and comfort, we also understand that time is money. That’s why each Neptune Electric Series is engineered to provide optimal operating efficiency. The high-performance AC drive motor is powerful, yet offer zero emissions. Features such as variable pumps adjust oil flow accordingly to provide quicker lifting cycles.
As with all Hoist Liftruck equipment, the Neptune Electric Series is 100% made in the USA. More than 75% of each truck is manufactured in-house at our East Memphis, Indiana factory with the remaining components sourced from reputable U.S. companies.
Capacity Range
15,000 – 55,000 lbs. (7 – 25 tonnes)
Wheelbase
94 – 170 in. (2,400 – 4,300 mm)
Load Center
96 in. (2,500 mm) The Neptune Electric Series is designed with a two-stage, wide-open mast and unique low-profile counterweight to provide the operator with unobstructed views in all directions.
The standard swing-style fork carriage allows the forks to operate independently or simultaneously. The forks are made of heavy-wall tubular construction and are hot-dip galvanized to protect against corrosion. The extruded rubber fork covering system provides added protection and is extremely resistant to cuts and tears. Each fork is covered with five bolt-on rubber sections, allowing sections to be easily unbolted and rotated to prevent uneven or premature wear.
Pin-mount, machine-contoured forks (high or low position)
Welded-nested channels with lift cylinders secured directly behind mast rails
Lift chain and optional attachment hosing located inside inner mast rail
Main and side thrust rollers are impact-resistant and designed to reduce friction; rollers are properly lubricated and sealed
Greaseable mast pivots constructed with wear-resistant bronze bushings and hardened steel pins
Safety valves built into base of lift cylinders for controlled lowering in the event of a hose failure
Chrome-plated rods on cylinders for easy seal replacement
Optional Equipment
Shifter spreader fork carriage
Custom fork sizes
Additional work lights A BIG TRUCK needs robust and reliable power in order to operate effectively and safely. The Neptune Electric Series is powered by a high-performance AC drive motor and load sensing hydraulic system, which offer not only power, but also increased productivity and efficiency.
AC drive motor
Electronic AC drive motor diagnostics with fault code history
Built-in engine protection system
Two-stage heavy-duty air cleaner with electronic restriction indicator
Heavy-duty isolated anti-vibration bolt-in drive line mounts
Bolted open-core radiator with high-capacity cooling system
100-amp alternator with built-in regulator (amps vary with capacity)
Easy-access remote-mounted oil filter
12-plate modulation for smooth shifting and added durability
Integral safety function prevents engine stalling when hydraulic system is dead-heading
Tilt-lock valve with counterbalance to prevent mast drift
Bolt-on hydraulic tank with suction strainers and high-capacity return line filters; large clean-out covers on top for easy access and convenient drain plug on bottom
Filters are easily accessible for quick replacement
External sump tank provides additional system cooling
Hydraulic multi-gauge provides quick and easy pressure readings with a twist of the dial; eliminates the need to tap into hydraulic lines
Standard 12-volt electrical system
Color-coded electrical wires enclosed with split-tubing wire loom wrap using sealed weather pack connectors
Two 12-volt, industrial batteries mounted in easy-access compartment
Electrical system controls LED headlights, tail lights, turn signals, backup lights, marker lights, brake lights and LED amber strobe light; lights are completely sealed and last approximately 10,000 hours Hoist Liftruck’s line of BIG TRUCKS starts with a strong foundation. The modular design of the Neptune Electric Series provides excellent serviceability without sacrificing strength or durability. The Neptune Series Electric has been designed and tested to meet or exceed current, worldwide regulations for stability, sound levels and safety.
Anchoring the Neptune Electric Series is the 100%-welded steel chassis, which boasts heavy steel cross supports to distributing weight evenly throughout the truck. Bolt-on components, such as hydraulic tanks, provide additional durability and optimal heat dissipation, as well as easy removal and attachment for repairs or shipping. Integrated lifting points also allow for safe handling and transport.
AxleTech Drive Axle
Planetary drive axle rated for durability in high-capacity, off-road applications
Force-cooled outboard wet disc actuated brakes reduces premature wear, extending life of brakes
Brakes can be serviced through the wheel ends without removing entire drive axle
Drive axle is bolted and dowel-pinned in the chassis
Industrial Steer Axle
Thick top plate on welded beam steer axle provides added strength and durability
Highly maneuverable in tight areas
Dual-action bolt-on cylinder is protected by heavy steel support beams and provides effortless power steering
Lower maintenance costs due to minimal amount of moving parts
Easy-access lubrication points
Sealed tapered roller bearings
High-impact greaseable composite trunnions
Paint/Finish
Full-frame powder-coating, which is up to 10 times thicker than traditional spray paint resulting in greater scratch and chip resistance
Environmentally friendly; produces virtually no volatile organic compounds (VOCs)
Galvanized forks and carriage
Stainless steel components (e.g. fittings, fasteners, bolts, rods, pins)
Optional custom paint design available We understand the importance of being able to service your lift truck easily and efficiently. Whether it’s routine maintenance or on-site service call, the Neptune Electric Series is designed to allow easy access to all integral components to minimize downtime. Easy-lift hoods, panels and doors give technicians immediate access to vital service points. The innovative hydraulic multi-gauge provides quick and easy pressure readings with a simple twist of the dial, eliminating the need to tap into individual hydraulic lines.
Every component on the Neptune Electric Series is sourced from a reputable U.S. vendor or manufactured by Hoist Liftruck. Utilizing the same domestic components throughout our product lines provides you with not only cost savings, but also rapid parts availability.
RemoteTech
Utilizing CANbus technology, RemoteTech is a vehicle management system incorporated into the Neptune Electric Series that provides onboard diagnostics and vehicle functions through a master digital display unit. RemoteTech’s master digital display unit replaces gauges, allowing comprehensive vehicle monitoring from a central hub.
Vehicle functions, such as lifting and vehicle speeds, can be quickly adjusted remotely in just a few minutes. Service technicians can also quickly detect issues through RemoteTech’s master digital display unit and view or download the vehicle’s fault code history.
Unlike similar systems that rely on third-party companies to program and troubleshoot the system, RemoteTech is programmed and operated by Hoist Liftruck.
Automatically detects issues such as clogged filters, overheated engine, vehicle overload and more
Decreases downtime and repair costs by detecting and resolving issues early
Parameters such as lifting speeds and fingertip control functions can be quickly and easily customized to fit operator preference
Ideal for fleet management; record and monitor engine hours, service intervals and operator usage

Specifications
CAPACITY RANGE: 15,000 – 55,000 lbs. (7 – 25 tonnes)
WHEELBASE: 94 – 170 in. (2,400 – 4,300 mm)
LOAD CENTER: 96 in. (2,500 mm)
Request A Quote
or just call (888) 778-4270
Check if you want to learn about promotions, sales and special events

60 years of continous service
Exellent customer satisfaction
Highly customizable services
Cutting edge GPS fleet tracking technology